WGC Series Controller
Overview
Control Mode: Auto-PID / Manual
Control Output: PWM or SSR
Consumed Power: < 2.5W
Load Capacity: 20A, 50W~2200W(110V) 100W~4400W(220V)
Power Supply: AC85~ 415V, 50/60HZ
Sensor Type: Thermocouple J or K
Output Type: Zero Cross / Phase Angle
Working Temperature: 0~50℃(32~122℉)
Storage Temperature: -20~70℃(-4~158℉)
Functions
- Auto, manual, standby function
- Two temperature scales selectable (C°/F°)
- Internal alarm buzzer
- Contactless switch
- PID auto control
- Load current, output percentage display
- Can be installed on floor stand
- Cabinet Zone – 5, 8, 12
- Dehumidify soft start function (avoid the humidity make the heater burn out)
- High/Low temperature alarm
- Thermocouple open, reverse, short alarm
- Heater open, short, overload alarm
- Over voltage protection function
- Fuse break alarm
- Compatible with DME, Athena, Yudo, etc. brands
- Remote standby function (optional)
- Alarm output function (optional)
- RS485 communication (optional)
Technical Specifications
Power Supply | 1-phase 3-wire, 240Vac, 50/60Hz | Control Mode | Auto-PID / Manual |
3-phase 4-wire, 240Vac, 50/60Hz | Control Accuracy | ±0.1%F.S | |
3-phase 5-wire, 380Vac, 50/60Hz
|
Load Capacity | 15A, 3600W | |
Sensor Type | Thermocouple J or K | Storage Temperature | -20~70℃(-4~158℉) |
Temperature Control | 0~450℃(32~842℉) | ||
Output Type | Zero Cross / Phase Angle | Working Humidity | 10~80%RH(No condensing) |
Working Temperature | 0~55℃(32~131℉) |