Sequence Valve Gate Controller – D800 Series
D800 Series – Sequence Hydraulic Valve Gate Controller
General Specifications:
| Power Supply |
AC85~265V, 50/60Hz
|
Zone number
|
1~8
|
|
Control Function
|
Auto / Manual
|
Control Mode
|
Mode-A / Mode-B / Mode-A
|
|
Input type
|
DC24V / Relay contact
|
Output type
|
AC220V / DC 24V / Relay contact
|
|
Time Range
|
0~99S / 0.0~999.9s / 0.00~99.99s
|
Load Capacity |
AC220V output: 1A/zone
|
|
Working Temperature
|
0~55℃ (0~131℉)
|
DC24V output: 50W or 240W | |
|
Working Humidity
|
10~80%RH(No condensing)
|
Relay contact: 3A/zone | |
|
Storage Temperature
|
-20~70℃(-4~158℉)
|
Features:
- 8 zones for injection sequence controlling
- LED display for valve delay time & open time with each zone
- Selectable time display mode (1s, 0.1s or 0.01s)
- Selectable output control mode (Mode-A or Mode-B or Mode-AB)
- Selectable input signal type (DC24V or Relay contact)
- Selectable output signal type (AC220V, DC24V or Relay contact)
- Auto/Manual function
- Optional DC24V/240W output for oil value (Optional)
- Pneumatic and hydraulic valve selectable
Operating Mode:
Mode A
Controller keep the Output valve gate open till the injection signal from molding machine is off
Mode B
Valve Gate output will close at the end of the “Open Time" and won’t function till the next injection signal
Mode A-B
Combination of Mode A + Mode B
Panel Button / Functions Layout
