Sequence Valve Gate Controller – SVG Series
SVG Series
General Specifications:
Power Supply |
AC85~400V, 50/60Hz
|
Module Quantity
|
24
|
Control Function
|
Auto / Manual
|
Control Mode
|
Mode-0 / Mode-1
|
Input type
|
DC24V / Relay contact
|
Output type
|
AC220V / DC 24V / Relay contact
|
Time Range
|
0.0~999.9s / 0.00~99.99s
|
Load Capacity |
AC220V output: 3A
|
Working Temperature
|
0~50℃ (0~131℉)
|
DC24V output: 30W | |
Working Humidity
|
10~80%RH(No condensing)
|
Relay contact: 3A | |
Storage Temperature
|
-20~70℃(-4~158℉)
|
Features:
- Dual Lines Led Display
- Selectable time display mode (0.1s or 0.01s)
- Selectable output control mode (Mode-0 or Mode-1)
- Selectable input signal type (DC24V or Relay contact)
- Selectable output signal type (AC220V, DC24V or Relay contact)
- Auto/Manual function
- Pneumatic and hydraulic valve selectable
- Polarity can be ignored when input signal is DC24V
- Connector type can be customized
Alarm turns on when the followings occurred
- Ultra-high or ultra-low Temperature
- Thermocouple break, short or inverse
- Thermocouple is out of its position
- Heater break, short or overload
- Output device is damaged
- Over voltage of power supply
Protection activated in the following situations:
- Over voltage self-protected, max.AC500V
- Thermocouple input protection, prevent module damaged by misconnection
- Thermocouple & heater inverse protection, prevent thermocouple damaged by misconnection
- Soft-start mode, avoid the moisture make the heater burn out
- Heater dehumidified time can be extended