PID Temperature Controller – CTM Series
PID Temperature Controller – CTM Series
General Specifications:
|
Power Supply
|
AC85~265V, 50/60Hz
|
Display Unit
|
4-digit LED
|
| Accuracy |
±0.5%FS
|
Output Type
|
Relay contact, AC250V/3A SSR Drive (Voltage pulse) SCR Drive (zero-crossing) DC.4~20mA, DC.0~10V |
|
Resolution
|
1°C
|
Aux Output | Micro-printer drive, DC24V feedback |
|
Input Type
|
Thermocouple (K, E, J, N, T, B, S) RTD (Pt100, Pt1000, Cu50, Cu100) Current (DC.0~20mA, DC.4~20mA) Voltage (DC.0~250mV, DC.0~10V) Resistor (0~80Ω, 0~400Ω) |
Alarm Output
|
Relay contact, AC250V/3A (Max.3-alarm） |
| Communication(optional) | RS485 | ||
|
Alarm Mode
|
Absolute, Deviation, Range |
Panel Size
|
72X72mm |
Features:
- Available for input signal preprocessing, such as root operation
- Thermocouple/RTD break, inverse or short alarm
- PV bias, PID self-tuning, manual control functions
- Sensor break, reverse, short alarm
- Alarm output and RS485 selectable
- Manual and soft start output control
- Multi type input signal
- Multi type output mode
- Communication, micro-printer interface and power feedback for the selection
- Single loop and dual loop control selectable
Ordering Parameters:
| Front Panel Size (W×H, mm) | 48*48 | 48*96 | 96*48 | 72*72 | 96*96 | |||
| Input Signal & Range | K03: K (-50~999 C°) | E03: E (-50~800 C°) | J03: J(-50~999 C°) | T03: T (-50~400 C°) | P06: Pt100 (-19.9~99.9 C°) | P03: Pt100 (-20~580C°) | 801: 4-20mA | 402: 0-10V |
| Control Output 1 (for heating control) | M: Relay contact (AC250V, 3A) | V: SSR Drive (Voltage pulse) | 8: 4-20mA | 9: 0-10V DC | ||||
| Control Output 2 (for cooling control) | M: Relay contact (AC250V, 3A) | V: SSR Drive (Voltage pulse) | 8: 4-20mA D.C. | 9: 0-10V DC | ||||
| Alarm output | Blank: None | M: 1x Relay contact (AC250V, 3A) | MM: 2x Relay contact (AC250V, 3A) | MMM: 3x Relay contact (AC250V, 3A) | ||||
| Transmit output | 8: 4-20mA DC output | 9: 0-10V DC output | Blank: No transmit output | |||||
| Power feedback output | Blank: No output (can be omitted) | V4: 24Vdc output | ||||||
| Communication | Blank: None | C1: RS485, Modbus RTU |
Panel Button / Functions Layout
