PID Temperature Controller
PID Temperature Controller – CTL Series
General Specifications:
|
Power Supply
|
AC85~265V, 50/60Hz
|
Operating condition
|
-10~60°C,25%~85% rH
|
| Accuracy |
±0.5%FS
|
Control method
|
Auto-tuning PID control/On-Off control
|
|
Resolution
|
1°C
|
Display Unit
|
Dual 3-digit LED
|
|
Input Type
|
Thermocouple :K,E ,J etc. RTD :Pt100,Cu50,Cu100 etc. |
Output Type
|
Relay contact, AC250V/3A, SSR Drive(Voltage pulse) D.C. 4~20mA |
|
Alarm Mode
|
Abosolute, Deviation, Range |
Alarm Output
|
Relay contact, AC250V/3A |
|
Panel Size
|
72X72mm | ||
Features:
- Using industrial-grade CPU, strong anti-interference ability
- Multiple alarm types, suitable for the use of different applications
- Input signal type can be set up by software
- Thermocouple/RTD break alarm
- Thermocouple inverse / RTD short alarm
- PV bias, PID auto-tuning, alarm delay, etc
- Sensor break, reverse, short alarm
- Alarm output and RS485 selectable
- Manual and soft start output control
Ordering Parameters:
| Front Panel Size (W×H, mm) | 48*48 | 48*96 | 96*48 | 72*72 | 96*96 |
| Input Signal & Range | K03: K (-50~999 C°) | E03: E (-50~800 C°) | J03: J(-50~999 C°) | T03: T (-50~400 C°) | P06: Pt100 (-19.9~99.9 C°) |
| Control Output | M: Relay contact (AC250V, 3A) | V: SSR Drive (Voltage pulse) | 8: D.C.4-20mA | ||
| Alarm output | Blank: None | M: 1x Relay contact (AC250V, 3A) | MM: 2x Relay contact (AC250V, 3A) | MMM: 3x Relay contact (AC250V, 3A) | |
| Communication | Blank: None | C1: RS485, Modbus RTU |
Panel Button / Functions Layout
