M20 Series – Integrated Touch Screen Controller
M20-Series is an integrated Touch Screen Mold Temperature Controller equipped with a various features and functions
|
User Interface
|
Full color LCD touch screen
|
Display Size
|
10.2" inches
|
|
Power Supply
|
1-Ph+E(3 wire)200-240Vac
|
Frequency
|
50-60Hz automatic switching
|
|
3-Ph+E(4 wire)200-240Vac
|
Control Mode
|
Auto-PID / Manual
|
|
|
3-Ph+N+E(5 wire)380-415Vac
|
Power Control
|
Zero Cross / Phase Angle
|
|
|
Thermocouple
|
J or K-Type, software selectable
|
Degree Unit
|
℉ or ℃, software selectable
|
|
Calibration Accuracy
|
±0.25% FS
|
Measurement Range
|
0~500℃(0~900℉)
|
|
Control Stability
|
±1digit-under steady state
|
Setting Range
|
0~450℃(0~842℉)
|
|
Overload Protection
|
Fuses on both heater legs
|
Load Capacity
|
Rated 240Vac, 16 Amps per zone
|
|
Working Temperature
|
0~50℃(0~122℉)
|
Soft-Start
|
Using low voltage for heater safety
|
|
Storage Temperature
|
-20~70℃(-4~158℉)
|
TC Connector
|
Varies options available
|
|
Working Humidity
|
10~80%RH(No condensing)
|
Mold Power Connector
|
Varies options available
|
|
Numbers of zone
|
24
|
Module
|
Temperature Control Module/ SVG Control Module
|
| Control output: |
PWM or SSR
|
Consumed Power: |
< 2.5W
|
| Load Capacity: |
20A, 50W~2200W(110V) 100W~4400W(220V)
|
Working Humidity: |
10~80%RH(No condensing)
|
| Model | M20-SH | M20-MH | ||
| User Interface | Full color LCD touch screen | |||
| Display Size | 10.2" | |||
| Max. Total Zones | 64 | 120 | ||
| Max. Temp. Zones (Cabinet) | 32 | 60 | ||
| Max. Sequence Zones | 24 | |||
| Power Supply | 3-Ph+E(4 wire) 200-240Vac | |||
| 3-Ph+N+E(5 wire) 380-415Vac | ||||
| Working Conditions | 0~55℃ (32~131℉), 10~80%RH (No condensing) | |||
| Storage Conditions | (-20~70℃) (-4~158℉), 10~80%RH (No condensing) | |||
| Temperature Control | ||||
| Control Mode | Auto-PID / Manual | |||
| Thermocouple | J or K-Type, software selectable | |||
| Load Capacity | Rated 240Vac, 15A/zone | |||
| Mold Power Connector | Varies options available | |||
| Soft-Start | Using low voltage for heater dehumidify | |||
| Setting Range | 0~450℃（32~842℉） | |||
| Control Stability | ±1digit-under steady state | |||
| Output Control | Zero Cross / Phase Angle | |||
| Calibration Accuracy | ±0.25% FS | |||
| TC Connector | Varies options available | |||
| Measurement Range | 0~500℃（32~932℉） | |||
| Temperature Unit | ℉ or ℃, software selectable | |||
| Overload Protection | Fuses on both heater legs | |||
| Sequence Valve Gate Control | ||||
| Trigger Signal | DC24V or Dry contact | |||
| Trigger Mode | 4 modes selected | |||
| Screw Position Signal | DC 0~10V | |||
| Screw Position Unit | mm or inch | |||
| Control Mode | Auto / Manual | |||
| Time Resolution | 1s, or 0.1s, or 0.01s | |||
| Output Signal | DC24V, or AC220V or Relay contact | |||
| Output Connector | Varies options available | |||
| Features | ||||
| Cabinet | Temperature only, SVG only, or Combination | |||
| Max. 80 zones | ||||
| Control Modules | “All in one” control module | |||
| 2-zone per temperature module (15 Amp per zone) | ||||
| 6-gate per SVG module | ||||
| HMI | Full color LCD touch screen | |||
| English/Spanish | ||||
| Fixed on mainframe or Stand-alone | ||||
| Alarms & Protection | Sensor broken /reversed /shorted /mis-connected | |||
| Load broken /shorted /overrated | ||||
| Temperature over high /under low | ||||
| Fuse blown | ||||
| Heating invalid | ||||
| Triac breakdown | ||||
| Power supply over-voltage | ||||
| Cabinet temperature over-setting | ||||
| Alarm output (optional) | ||||
- Interface Language: English, Spanish
- Single zone: 15A 3600W
- USB port (storage and reading)
- Thermocouple open, reverse, short alarm
- Heater open, short, overload alarm
- Over voltage protection function
- Remote standby function (optional)
- Alarm output function (optional)
- RS485 communication (optional)